BACK TO DAN'S CAT. NO.10









Up Dated November 14-2016





Dan's Special Deals and Left overs Page.




Below are some left overs and special deals.

No large quanity on most of the items below.

Check out the items that have "Best Deal Price" by them

Great way to save even more money.

You will save a lot!

If an item sells out it will be deleted asap.

No back orders and if an item is sold out a refund will be sent with Your order.

More items will be added to this page as time goes by.

So check often.

This page is Dan's shop until You drop page!

Its pretty big.




*****FOR ORDERS*****

CLICK HERE For How to order and

Shipping costs and etc.



NOTE: New items listed will have the little

[NEW BUTTON]

above the item.








WINTER SPECIALS


600 Piece By-Pass Capacitor Kit.

All Ceramic Disc, long leads, 50 volt or better.

Kit includes 100 pieces each of the following vaules.


100 Pieces .1uf

100 Pices .01uf

100 Pieces .001UF

100 Pieces .047uf

100 Pices .02uf

100 Pieces .0022uf (2200pf}

600 Pieces total and price...

$12.00



Below are some great winter specials.

No back orders and when the deals below are sold out will be removed.

Some great deals below, so get some why You can.




50 Piece Dip Mica Capacitor Kit.

Kit No. A.

Kit includes the following Dip Mica Caps.

2 Pieces 10pf

2 Pieces 12pf

2 Pieces 20pf

2 Pieces 22pf

2 Pieces 27pf

2 Pieces 33pf

2 Pieces 39pf

2 Pieces 43pf

2 Pieces 47pf

2 Pieces 50pf

2 Pieces 56pf

2 Pieces 62pf

2 Pieces 68PF

2 Pieces 75pf

2 Pieces 82pf

2 Pieces 91pf

2 Pieces 100pf

2 Pieces 110pf

2 Pieces 120pf

2 Pieces 130pf

Plus 10 assorted Dip Mica Caps, for total of 50 Pieces.


Pric

$15.00




50 Piece Dip Mica Capacitor Kit.

Kit No. B.

KiT includes 2 ea. of the following Dip Mica Caps.

2 Pieces 150pf

2 Pieces 180pf

2 Pieces 200pf

2 Pieces 240pf

2 Pieces 300pf

2 Pieces 330pf

2 Pieces 360pf

2 Pieces 390pf

2 Pieces 430pf

2 Pieces 470pf

2 Pieces 500pf

2 Pieces 560pf

2 Pieces 620pf

2 Pieces 750pf

2 Pieces 910pf

2 Pieces 1500pf

and 8 more assorted dip silver mica capa.

Total pieces 50

Price...

$15.00



335 Piece Semi-conductor Kit.


Below is a great way to stock up on some nice Semi conductors.

Kit includes the following.

100 Pieces 1N4148'S

10 MV104

25 Pieces 2N2907A

10 Pieces SD103A OR SD103A

10 Pieces 1N6263

10 Pieces MVAM109'S

10 Pieces 2N918 Metal Can

10 Pieces 1N4006

10 Pieces BC547

10 Pieces TA7842 AM Chip.

10 Pieces 2N4403

20 Pieces 2N3904

10 Pieces 78L12

10 Pieces Bat29

10 Pieces MPSH-10

10 Pieces 1N4007

20 Pieces BF1012-12 Mosfet

10 Pieces 1N4004

10 Pieces 2M7000 Mosfet

10 Pieces 1N34

335 Pieces total.

Price..

$16.50
NOTE: All of the above items are in separate zip lock bags.

Limit of 2 of the 335 Piece Semicondutor kits per order




50 Pieces IC KIT.


Nice 50 Piece IC Kit.

All are thru hole parts.

Includes the following below.

5 Pices LM386

5 Pieces NE555

5 Pieces LM358

5 Pieces TLO82

5 Pieces TLO-81

5 Pieces LM1458

5 Pieces NE5532

2 Pieces NE5534

2 Pieces TLO74

2 Pieces LM301-H Metal Can

2 Pieces SA612AN

2 Pieces CA3046

5 Pieces TA7642 AM Radio IC.

50 Pieces total.

Price...

$15.00




4 Pieces of a [Unique ] Slug tuned coil form.


DSC00037695423


The size 1/4" DIA. BY 1 1/2" LONG

THE SLUG IN THESE IS 5/8" LONG SO YOU CAN COME UP WITH A NICE RANGE

EXAMPLE:20 TURNS OF # 20 ENAMEL WIRE = .6UH TO 4.5UH

32 TURNS OF #24 ENAMEL WIRE =3.2UH TO 4.5UH

DISCLAIMER...The range is what I got how ever what You get may vary, be ware of this.

These have 4 pins on the bottom and there is a factory installed ceramic cap on 2 of the pins, You can cut that off up by the cap body and save the 2 pins for maybe a dual winding on the form or etc.

These slug tuned coil forms are being closed out..reg price ..$2.50 Ea.

4 piece close out price..

4/$2.80




Nice Tin Plated Ground lugs.


dsc00111113335679

100 Pieces of nice tin plated ground lugs.

Size 11/16" long aprox.

Big hole in lug aprox 3/16" dia.

Long end has hole for wire..

Great deal..

Price...

100/$5.00

2 bags of 100 per bag for only..

$8.00




30 Piece Iron Powder Core Kit


DSC11300568

Nice 30 Piece Iron Powder Core KIt.

Includes 5 each of the following cores below [From left to right in the photo]

5 Pieces T68-6 [YELLOW]

5 Pieces T68-2 [RED]

5 T50-6 [YELLOW]

5 Pieces T50-2 [RED]

5 Pieces T37-6 [YELLOW]

5 Pieces T37-2 [RED] These are brand new from bulk and are Made by Micro Metals

Price.

$8.50



500 Piece Grab Bags


500 piece plus grab bags are back.

These 500 piece grab bags contain all kinds of fun stuff.

Each bag will have over 500 pieces.

Dan's has had these 500 piece grab bags many times over the years and found time to make up some more.

The 500 Piece grab bags have a lot of left overs and discontinued items in them.

Items that Dan's does not have enough stock left to list and etc.

Price...

Price...

$6.50

Close out special.

3 of the 500 piece grab bags for only

$10.00


Notice: Due to weight of these 500 piece grab bags there is a limit of 1 of the 3 bag grab bag close out special per order.Thanks










Jackson Bros 2.5-100pf Small Panel

Mt. Air vairable Capacitor.


DSC05578

Small Panel Mount Air Variable Capacitor.

2.5-100pf and made by Jackson Bros of England.

Body 3/4" square aprox.

1/4" shaft stainless steel.

Shaft 3/4" long.

PRICE..

$12.50



Small Panel Mount Air Variable Capacitor.


DSC05900

5.0-15.5PF Small Air Variable Capacitor.

7:1 built in reduction drive.

Small size 1-3/8" wide X 7/8" deep.

Body brass.

1/4" shaft double bearing type.

$14.95

Just a few of these left.



4-40 X 1/2" long Machine Screws with Captive lock washer.


DSC06052

Price...

100/$2.50



10 Pieces Little Jumper Wires.


DSC06051

10 Pieces of some very nice 8" long jumper wires

Different colors.

These be good for some of those small projeces.

10 pieces [each 8" long}[assorted colors] for..

10/$1.00




1000Pf [.001mf] Silver Mica Capacitor.


DSC06050


Nice 1000pf 2% Tol. 500 volt silver mica capacitors.

3/4" long X 7/16" Wide aprox

Long leads, You can bend and use radial style if You want.

Price..

$0.65 ea.



Jackson Bro's 10:1 Epicyclic Drive

Cat. No.5857

Photo No.1 below.

DSC05907

Photo No.2 below.

DSC05908

look at both of the photos..specs and etc. there.

This is a beautifull ball drive.

Price..

$35.00 ea.




Adjustable Torque Ball Drive.

CAT. NO.5620


Photo No.1

DSC03794

DSC05909


DSC05910

Very nice ball drive, Look at photos for specs.

Price..

$25.00.00





1 Piece Mini Circuits Labs ADE-1 Level 7 Mixer.

Plus Circuit Board.

DSC05657

Click Here for Data Sheet

The Little circuit board is just like Mini Circuits Labs Suggested Lay out in Data Sheet.

These are new old stock from bulk and only a few left.

Price..

$7.25



Small Nice JFD Glass Piston Capacitor.


DSC05899

Small Glass Piston Capacitor.

1.5-28.5pf

These are made by JFD and 350 volt or better.

Nice piston Capacitors.

Price...

$2.00ea.

Special deal...

3/$4.00




Jfd Glass Piston Capacitor


DSC05905


.5-10PF Glass Piston Capacitor.

350 Volt or higher.

Price..$1.50ea.


Special..

3/$3.00




25 Assorted Trim Capacitors


DSC06012

Here is a great deal..25 assorted trimmer capacitors..all different kinds,

Air trimmers, 6mm timmers, piston trimmers and lots more...

You will get a good assortement of 25 pieces.

The photo gives You example of some of the kinds in the 25 piece bags.

The little 6mm's are Murata.

At only $0.10ea, this is a great deal.

Each bag will be different, stock up now while available.

Price...

25/$2.50









50 Beautiful Ground Lugs


DSC05890

50 Beautiful ground lugs.

Look at the photo..Very nice tin Plating on these ground lugs.

Hole fits No. 6 Screw and No. 8 Screw and if You use a small washer You can use 4-40 screws also.

Price..

50/$6.00

Special deal..

2 bags of the 50 piece ground lugs for..

2/$9.50






15 Piece Voltage Regulator Kit.

Includes 5 ea. of the following voltage regulators.

5 Pieces LM317-T adj reg.

5 Pieces 7812 12 volt reg.

5 Pieces 7808 8 volt reg.

15 pieces total and price...

$4.50




Iron Powder Core Specials below

All the cores listed below are from Micro-Metals.




T68-7 Iron Powder Cores


DSC06017

Price..

2/$1.00







T37-7 Iron Powder Cores


DSC05889


5 Pieces T37-7 Iron Powder Cores.

Price...

5/$1.00


DAKA-WARE Pointer Knob


DSC05883

Nice Vintage Dak-ware pointer knob.

Made in USA.

Dia. 1-1/8".

Price...

$1.75 ea.




4 Piece Toggle Switch Deal


DSC000012

Kit Includes 2 Pieces DPDT [ON-OFF-ON] 6AMP 125 VAC

2 Pieces SPDT [ON-0FF-ON] 6 AMP 125 VAC

Price on 4 piece toggle switch deal.

$2.75




MOTOROLA MV1662


DSC05876

1 Pack [3 pieces] SMV1662M3 Matched tuning diodes.

Price..$3.00




100 Piece Voltage Regulator Kit


Nice 100 piece voltage regulator kit.

The kit includes the following voltage regulators.

5 Pieces LM317-T

2 Pieces 7812

3 Pieces 7809

6 Pieces 7808

2 Pieces 7805

3 Pieces 78L18

3 Pieces 78L15

3 Pieces 78L12

20 Pieces 78L09

10 Pieces 78L08

3 Pieces 78L06

20 Pieces 78L05

20 Pieces TL431

100 Pieces total and price for this nice 100 Piece voltage regulator kit...

100/$16.50







50 Piece Trimmer Capacitor Assortment.


Here is a nice 50 piece trimmer cap kit.

These are 6mm dia. 100 vdc. 2 legs.

Top Adj.

This kit includes 5 ea. the following vaules below.


From left to right in the following the values are.

5 Pieces 2.5-7.5pf Blue [npo]

5 Pieces 3-10pf [white]

5 Pieces 5-20pf [red]

5 Pieces 7-30pf [green]

5 Pieces 4.5-45pf [yellow]

5 Pieces 15-60pf [brown]

5 Pieces 2-5-70pf [green]

5 Pieces 2.5-85pf [orange]

5 Pieces 23-100pf [brown]

5 Pieces 8-150pf [black]

Nice trimmer cap kit for the junk box.

Price...

$12.50




10-100PF Ceramic Trimmer Capacitor


DSC05857

Nice 10-100pf ceramic mica trim capacitor.

350 volt.

This little ceramic trimmer capacitor is 5/8" X 3/8".

The little trimmer has a knob on it to fast adj. and also in the middle a adj. screw for fine adjustments.

Price...$1.25ea.


Special deal for short term on these 100pf trimmer caps...

10/$6.50




Air Variable Capacitor Close Outs


Below are some nice Air Variable Capacitors that are being closed out.

No large quantity on any of these nice Air Variable Capacitors listed below.






2.5-20PF Panel Mount Air Variable.




DSC05556


2.5-20PF Small Panel Mount Air Variable Capacitor.

Made by Teleradio.

The ceramic front is 1-3/16" square.

1/4" shaft and include mounting hard ware.

Price...

$6.00




3.5-35PF Panel Mount Air Variable Capacitor


Photo No.1

DSC05507

Photo No.2

DSC05508

Very nice Panel Mount 3.5-35pf Panel Mount Air Variable Capacitor.

1/4 shaft and shaft length is 3/8" long and 1/4" dia.

The width of the capacitor at the ceramic part is aprox 7/8". [That is the widest part of the ceramic]

3/4" wide at the bottom of the ceramic part.[The bottom part of the ceramic is where the 2 factory pressed pins are.]

The length of the cap from the ceramic base to the end of the plates is aprox 7/8"

Includes mounting hardware.

New old stock by ASP.

Price....

$6.00 ea.

Special Deal...2 of the small 35pf air variables for...

2/$8.00.00




0bb5_2


DSC00357

This is a nice panel mount air variable and includes 1/4" shaft adapter kit.

CLICK HERE










ADAPTER KIT FOR APC TYPE AIR VARIABLES


DSC00357000

You got some apc-screw driver type air variables in your junk box and want to put a 1/4" shaft on them?

Well here is a 4 piece adapter kit that will do just that.

1/4 metal spacer shown is 1/4" dia. X 1/2" long.

See Photo's of how to convert a screw driver apc type air variable so that it has a 1/4" shaft.

Price on this 4 piece kit..

$1.00




0bb5_2

2 section Poly-Varicon Air Variable

Capacitor.

DSC04631

1 Piece of a 2 section Poly-varicon air variable capacitor.

1 section is around 90pf and the other is around 148.00Pf and the other 2 smaller sections are around 30pf so if you put them all together you can get around 300pf or so.

The low on the 2 larger sections is around 9.5pf and the low on the smaller 2 sections is..around 8.5pf.

Be advised if you hook all 4 sections together the high be around 300pf and the low be around 36pf

There are also 4 small trimmers on the bottom of capacitor that give you about 4 or so pf of additional adjustment.

Included is 2 metric mounting screws and 1/4" shaft adapter.

These are new old stock and built good..better than some of the cheaper types floating around out there.

No large quantiy available.

Price...

$4.50 ea.




0bb5_2



Small Nice knob with white pointer line on top.

DSC06061

Fits the shaft on these pots.

Size bottom 5/8" wide aprox.

3/8" tall aprox.

Top Dia 7/17" aprox.Price...

2/$1.00




10 Piece Pot Kit A.


DSC05626

Kit includes 2 ea. of the following pots.


2 Pieces 1k Pots.

2 Pieces 5k Pots.

2 Pieces 10k Pot.

2 Pieces 50k Pots.

2 Pieces 100k Pots.

10 pieces total and includes mounting hard ware.

Also included are 5 nice knobs that fit the shaft of these nice pots.

Price on this nice 10 Piece pot & knob kit...

$6.95




Nice Small Pointer Knob.


DSC05716
Price 2/$1.40




ADAPTER KIT FOR APC TYPE AIR VARIABLES


DSC00357000

You got some apc-screw driver type air variables in your junk box and want to put a 1/4" shaft on them?

Well here is a 4 piece adapter kit that will do just that.

1/4 metal spacer shown is 1/4" dia. X 1/2" long.

See Photo's of how to convert a screw driver apc type air variable so that it has a 1/4" shaft.

Price on this 4 piece kit..

$1.00







0bb5_2


IF CANS BELOW


Below are a couple of If Can deals.

Please pay attention and make sure You order the one You want.

IF Can Deal No. 1.

TOKO IF CANS


DSC05542

TOKO 500UH IF CANS, 10MM Size.

The high is little over 500uh and the low or bottom is around 220uh.

Single winding with no center tap.

These have 5 pins, 3 pins on one side and 2 on the other side.

These are not that hard to rewind and do a secondary winding using the 2 pins or You can also do a center tap on the 3 pin side.

These are easy to take a part, here is how.

Take a small screw driver and turn the adj. slug in and keep turning and it will push the bottom part of the coil form out of the metal can.

Easy to put back together also after rewinding, if that is what You want to do.

See Photo below of one that has been taken apart.

Price...on the If can deal No.1...

10/$5.00



DSC05541



0bb5_2

IF Can Deal. No.2

Here is a neat Little If can deal.

These little cans are 10mm size and have 5 pins on bottom of can.

3 Pins on 1 side and 2 pins other side.

They are slug tuned and are adj. at top.

The inductance on the 2 pin side is aprox 650uhy-1.125mhy

The 3 pin side is center taped.

The inductance is 15-5uhy-33huy

The center tap inductance is 4.25uhy-9.0uhy.

Note: Look at the photo above and these are same size as the Toyko cans and You take a part the same way if You want.

Price on IF CAN deal No. 2...

10/$5.00



Notice: The if cans above were measured with a ALDE L/C Meter IIB.




0bb5_2


9.0 Volt Panel Light


DSC05540

Very nice small panel mount light bulbs.

Below is a couple of photos, the bright one is at 9 volt and the dimmer one is at 5 volt.


9 VOLT Below

DSC05539

5 VOLT Below


DSC05538

Bulbs are about 9/16" long [that is the glass part.]

Dia. about 3/16".

Nice to have some of these around to light things up a little.

Price...

20/$2.00

Or buy 40 for only

40/$3.00




0bb5_2




0bb5_2


NICE AUDIO FILTER KIT


DSC00053


Here is a nice active audio filter kit and has the following features
Switch to switch in and out {on or off}

Small circuit board..1" wide X 1-1/2" long

Center frequency 700hz..

Can change frequency to 640hz or tighter with components supplied

Ic used..TL082 OR TL072

Includes all resistors and capacitors....001mf caps are npo and 5% tol.

This is a very nice..compact active audio filter kit and works great on the NNIG OR NW80/40 AND other type receivers or transceivers.

Price..

$10.00




Neophyte Receiver Kit.

Manhattan Construction Kit

Here is a Bare Bone version of the Neophyte Receiver.

This receiver was featured in the Feb. 1988 QST.

See Photos below.

DSC2211334

DSC05585



Note: The etched pc board in the photo below is not included, for reference only.

DSC05586

The Kit offered here includes

1 Piece Raw single sided pc board.

3" x 2-3/4"

A few pieces of pc board material to make Your pads.

1 Bag of the main board mounted components.

Band pack bag.

board mounted components, and yes that includes the Ic's,capacitors,resistors and IF cans].

You the buyer furnish a box to put it in..all connectors and jacks,hook up wire,solder and etc.

It also needs any where from a 1k or 5k,or 10k audio pot or linear pot the ones with spst switch work nice or just use a spst switch.

The air variable capacitors can be any where from say 25pf to 365pf.[The smaller the air variable, the less band spread You will have.

Hint: You can also put a small air variable capacitor [10-15pf] in parallel with the main air variable.

You now have some fine tuning Ability or do they call that band pass tuning?

Also needed is 1 poly air variable about 200pf,[The ones that are 140pf and 60pf per section work great.]

The cost of this same deal presented here was around $18.50 Plus shipping back in 1988.

The Neophyte is a DC RECEIVER and for its simple design works rather well.

You can buy a etched pc board from.

Far Circuits

ARRL QRP CLASSICS

THE NEOPHYTE 40 METER RECEIVER USING NE602'S (QST 12/88)

Price..$5.50 plus Freds current shipping charges

The kit Includes 1 COPY OF Article.

The Article includes a Circuit-board etching pattern for those that want to roll their own board.

Article also includes a Parts-Placement guide.

[Article supplied with kit only.

Sorry Dan's is not in the printing business.]

The Receiver uses 1 Ne602AN or SA612AN and 1 LM386-1 audio amp,all parts are thru hole parts.

Fun little receiver for the right person and yes it will drive a speaker...

Please make sure You state what band You want on Your order form. This is important!

Price for this bare bones Neophyte kit

80 Meter bard bones Manhattan Construction Kit..

$13.50


40 Meter bard bones Manhattan Construction Kit..

$13.50

Note..the Neophyte kits are back in stock.


0bb5_2


LITTLE JOE TRANSMITTER

Parts Kits


DSC05534

From QRP Classics page 9 and also featured in Solid State Design

Kit includes all board mount components

The Little Joe has 3 Metal can transistors.

1 2n2222A

1 2N4036 or 2N4037

1 2N3553 or RCA4013 or MRF8004

[Yes a heat sink for these powerfull Rf Transistors is included in the kit]

The Little Joe has a tremendous output of 1-1/2 to 2 watts of RF Power

With the right kind of antenna, this is enough RF to work about any body You can hear.

Kit also includes piece of raw circuit board. [See Photo}

The raw piece of circuit board is aprox 2-3/4" by 2-3/4", This is little bigger than the etched board You see in photo.

Also included is a few strips of Pc Board for those that want to make some Manhattan Pads.


For those of You who would like to see some examples of Manhattan Pad construction

CLICK HERE

Note: The etched circuit board in photo is for reference only and does not come with this kit

NOTE: This kit does not include and etched circuit board or crystal

You can etch Your own or use ugly type constuction or Manhattan pad type construction.

AVAILABLE for the following bands and make sure you indicate the band you want, when you order

  • 80 Meters
  • 40 Meters

    The band pack will be marked..The photo shows one for 10/15 Meters.

  • 20 Meters
  • 10/15 Meters

PRICE ON THIS NICE LITTLE TRANSMITTER KIT IS

$12.50


A etched circuit board is available from Far Circuits.


CLICK HERE

The current price for board as of March 20-2014 is $4.50 and listed under Transmitters.

Look for this here....[ARRL QRP CLASSICS W7ZOI LITTLE JOE TRANSMITTER $4.50]

Also check with Fred on His Shipping costs.


Crystals are available from sources on the net or a vender on E-bay sells them.

Kit comes with 3 pages of information and also for those that want to etch their own board then Etching pattern included with the 3 pages of information.

See Photo below

DSC05537




30 Meter Little Joe Transmitter Kit.


This little 30 meter transmitter for 30 meters is and adapted from the W7ZOI design that a lot of us call the Little Joe Transmitter.

This Unit here was featured in QST NOV. 1986 Page 43 and was also featured in QRP CLASSICS [long out of print] page 96.

The circuit is all most Identical to Original Little Joe circuit.

Adaptions to the original circuit were made by WD4DDS as well as the Article that was in the Nov. 1986 QST.

There have been a few people that have wanted a small little 30 meter Transmitter like the Little Joe that is avail for other bands.

Well here it is.

The kit includes everything the other Little Joe kits above include plus a copy of the Article.

I decided to build one of these just to make sure it did work.

It works great and a little over 1 watt of RF POWER OUT..With a MOTOROLA MRF8004 for the final at approx 12.5 volts.

The other 2 transistors are a 2N2222A metal and a 2N4036 OR 2N4037 Switching transistors.

The crystal is a 30 meter crystal HC-18U Package.

I built this unit ugly construction and did not use a small format.

I like lots of finger room because of Arthritis in these old fingers of mine!

Look at the couple of photos and the out put is a little over 1 watt on the 10 watt scale of the meter in photo.

I did not do any tweaking or stuff like that. After a couple of smoke tests and then going back and finding My errors got the little unit to fire up.

The keyed signal has kind of a soft tone to it and I like that.

As stated the kit includes everything the other little Joe kits above include and the price...

$12.50

Back in Stock.

It was also stated in the Article that You could use the circuit board that the other little Joes Use, not sure on that but by looking at the 2 circuits it sure looks like You could.

Photo No.1

DSC05593

Photo No.2

DSC05595

Photo No.3

DSC05594

I used the 10 watt scale of the watt meter in the Photo.




10.116Mhz Crystal

Transmitting crystal for the above 30 meter transmitter.

HC-49 Case..Long leads...

Price...

$2.00 ea.

Special..

5 of the 10.116 mhz crystals for..

5/$2.50



A MODIFIED CUBIC-INCHER TRANSMITTER


DSC03750

A MODIFIED CUBIC-INCHER TRANSMITTER


THIS LITTLE KIT IS A MODIFIED VERSION OF THE 40-M CUBIC INCHER BY DENNIS MONTICELLI, AE6C WHICH APPEARED IN JULY 1982 QST...THE KIT IS AVAIL FOR EITHER 40 METER OR 80 METERS..

OUT PUT IS AROUND 2-4 WATTS..AND USES MRF472 OR 2SC2075 AND ETC...PLEASE WHEN YOU ORDER SPECIFIE WHAT BAND YOU WANT WHEN ORDERING

KIT INCLUDES LITTLE BOARD AND ALL BOARD MOUNTED COMPONENTS..DOES NOT INCLUDE TRANSMITTING CRYSTAL

THERE ARE A FEW PLACES OUT THERE THAT SELL CHEAP CRYSTALS FOR TRANSMITTING ON THE VARIOUS QRP BANDS

JUST PLUG IN QRP TRANSMITTING CRYSTALS IN YOUR SEARCH BAR AND SOMETHING THING SHOULD COME UP...OR TRY THIS PLACE...AND CHECK OUT THEIR LIST OF PARTS SUPPLIERS AND THEY HAVE LOTS OF OTHER INFORMATION THAT IS INTERESTING ALSO

PRICE OF THE LITTLE CUBIC INCHER 40 METER TRANSMITTING KIT IS..$13.50

Price of the 80 Meter Cubic Incher kit.

$13.50


PLEASE STATE WHAT BAND YOU WANT WHEN YOU ORDER...THE CUBIC INCHER KIT




THE 80 METER CUBIC INCHER KIT INCLUDES 2 CRYSTALS AS A BONUS..1 EACH OF THE FOLLOWING CRYSTALS...3.6864 AND 3.5795..

HAD SOME EXTRA OF THESE 2 CRYSTALS SO INCLUDE THEM IN THE 80 METER VERSION OF THE CUBIC INCHER AT NO EXTRA COST..WHILE SUPPLY LASTS..

EVEN IF YOU DO NOT USE THESE 2 FREQ. ..STILL MAKES IT FUN



0bb5_2


FT37-43 Ferrite Cores.


DSC05433333

FT37-43 Ferrite Cores

The FT37-43 ferrite cores are probably the most used core there is, as far as used by builders of Ham Radio Equipment and projects and etc.

Great Deal here..

25/$5.00

Or..buy 2 25 piece kits for...

$8.00








0bb5_2


HI-Q Johnson Air Trimmer Capacitors


DSC05506

0.5-10PF JOHNSON 189-503-103 and Johnson 189-503-106 both 250VDC

BASE 7/16" SQUARE AND LENGHT OF CAP. 7/16"

TOP OR BOTTOM ADJ 2 PIN

You will get and assortment of the 2 numbers listed..they are both same range.

Reg. price at Dan's catalog no.10 is $2.00 each...

Special deal...

5/$4.00

Special deal..

10 pieces of the 0.5-10pf Johnson air trimmers for..

10/$6.00




0bb5_2


DSC05505

2.2-22.5PF JOHNSON MODEL NO. 189-508-5 250 VDC AIR TRIMMER

9/16" WIDE BY 7/16" LONG TOP OR BOTTOM ADJ.

2 PIN MOUNT..PRICE ON THESE NICE AIR TRIMMERS IS

$3.25 EA.

Special Deal.

4/$5.00






0bb5_2


1000pf [.001uf] Feed Thru Capacitors.


DSC27


1000PF Feed thru capacitors.

250 volt..

Nice feed thru caps.

Special Deal...

Price...

25/$4.00

Special....50 of the little feed thru caps for...

50/$6.00

Stock while avail at a great price.




0bb5_2

22PF NPO Monolithic Ceramic Capacitors


DSC08

DSC10

Very nice 22pf Monolithic npo capacitors, voltage 50 volt, tol. 5%

Long leads and small spacing..Look at photo how nice they fit the NNIG BOARD.

Stock up at a great price on these...

50/$2.50

Special deal...

100 Pieces of the 22pf npo mono caps for...

100/$3.50

0bb5_2

2.2UF 50 VOLT ELECTROLYTIC CAPACITORS


DSC22

Nice 2.2uf 50 volt electrolytic capacitors.

Size 5.5mm Dia. X 11mm

Price..

25/$1.00




0bb5_2


SMALL RED LED


DSC17

Very nice small red led.

Size...6.5mm wide X 7.5mm tall.

9 volts gives a nice glow, 12 volts more bright.

Price...

25/$1.00




0bb5_2

5 MM LED [RED]


DSC04


Nice 5MM leds.

9 volts gives a nice glow and 12 volts brighter.

A dropping resister in one of the leads and would work on other voltages.

Price...

25/$1.00




0bb5_2

5 MM LED [yellow]


DSC03


Nice 5MM leds.

9 volts gives a nice glow and 12 volts brighter.

A dropping resister in one of the leads and would work on other voltages.

Price...

25/$1.00












0bb5_2

SPECIAL DEAL ON CHOKES BELOW


DSC00306

THESE ARE SOLD IN QUANTIES OF 10 EA.

PLEASE MAKE SURE YOU GET PRICE RIGHT AND NO MIXING OF VAULES PLEASE.

NOTE: SEE PHOTO ABOVE FOR EXAMPLE OF WHAT LITTLE CHOKES LOOK LIKE



10 Pieces .39uh...price...10/$1.50




10 pieces of .47uh chokes....price...10/$1.50



10 pieces .82uh chockes....price...10/$1.50



10 Pieces 1uh chokes....price...10/$1.50



10 pieces 1.2uh chokes....price...10/$1.50



10 pieces 1.5uh chokes....price...10/$1.50



10 pices 1.8uh chokes....price 1010/$1.50



10 pieces 2.2uh chokes....price...10/$1.50



10 pieces 2.7uh chokes....price 10/$1.50



10 pieces 3.9uh chokes....price...10/$1.50





10 pieces 4.7uh chokes....price...10/$1.50



10 pieces 5.3uh chokes...price...10/$1.50



10 pieces 5.6uh chokes....price...10/$1.50



10 pieces 10uh chokes....price...10/$1.50



10 pieces 12uh chokes....price...10/$1.50



10 pieces 15uh chokes....price...10/$1.50



10 pieces 18uh chockes....price...10/$1.50



10 pieces 22uh chokes....price...10/$1.50



10 pieces 27uh chockes....price...10/$1.50



10 pieces 33uh chokes....price...10/$1.50



10 pieces 47uh chokes... price...10/$1.50



10 pieces 62uh chokes....price...10/$1.50




10 pieces 100uh chokes....price...10/$1.50




10 Pieces 120uh chokes....price...10/$1.50



10 pieces 150uh chokes....price...10/$1.50



10 pieces 180uh chokes....price...10/$1.50



10 pieces 220uh chokes....price...10/$1.50



10 pieces 270uh chokes....price...10/$1.50



10 pieces 330uh chokes....price...10/$1.5010 Pieces 560uh

10/$1.50



10 pieces 680uh chokes....price...10/$1.50






30 Piece Choke Kit.

Here is a nice 30 Piece choke kit.

Kit includes 10 pieces of 3 popular chokes.

10 Pieces 1000uh

10 Pieces 100uh

10 Pieces 10uh

30 Pieces total..

Price..

$3.00



0bb5_2

6MM DIAMOND ISLAND PAD CUTTER.


DSC03446

HERE IS A NICE DIAMOND ISLAND PAD CUTTER...THE SHAFT IS 5/16" DIA. AND THE DIAMOND END MILL PART IS 1/4" DIA.

THESE WILL MAKE LOTS AND LOTS OF ISLAND PADS ON PC BOARD.

THE NEW JERSEY QRP CLUB HAD A NICE ARTICAL ON HOW TO MAKE ISLAND PADS.

CLICK HERE

NOTE: YOU WILL NEED DRILL PRESS TO USE THESE..IF YOU TRY TO USE JUST A REG DRILL..FORGET IT..THE DIAMOND END MILL WILL JUST BOUNCE ALL OVER THE CIRCUIT BOARD.

PRICE ON THESE NICE DIAMOND ISLAND PAD CUTTERS..

$5.00




0bb5_2

5MM DIAMOND ISLAND PAD CUTTER.


DSC00269

HERE IS A SMALLER ISLAND PAD CUTTER..5MM SIZE ON THE DIAMOND END MILL PART.

SHAFT IS A BIT SMALLER THAN 5MM

YOU NEED DRILL PRESS FOR THESE..IF YOU TRY AND USE IN A REG HAND DRILL..THE BIT JUST BOUNCE ALL OVER THE PC BOARD.

$3.50

SPECIAL COMBO DEAL


Here is a special deal on the Island pad Cutters.

Deal is for 1 piece 6MM

1 piece 5mm

Price is...

$6.50




I-land Pad Cuter Pad Photos

Below are some photos of what I-land pad cuter pads look like after made with one of the diamond core drills.


Photo no. 1

DSC05587

Photo no.2

DSC05588

Photo no.3

DSC05589

Photo no.4

DSC05590


With a little practice the cutter makes some pretty nice pads. The pads are easy to tin up and start mounting parts.

You do need a drill press how ever..I have tried using a hand drill and You get that bounce effect!! That means the drill wants to travel all over the pc board. If You look at one of the photos You can see what I mean.

One hint to make sure You do is make sure You check that there are no bridges between the pad and the Adjacent PC Board material.

A dental pic works great for this to run in the little grove that pad cutter makes to clean out and make sure no bridges.

I love the little drill press You see in one of the Photos.

Its a little PROXXON and the chuck takes up to 1/4" dia. bits.

Its kind a pricy little out fit, but handy to have around.

Micro Mart also sells something very close if not a clone of this little drill press, in fact they sell 2 sizes.

And they are less money than the PROXXON.







22UH CHOKES


DSC04670

50 Pieces of a 22uh as shown in photo.

10% tol. and nice.

Price...

50/$1.00






1N5245B Zener Diodes


DSC04656

20 Pieces 1N5245B 15V 500mW Zener Diodes

Price...

20/$1.00




2.5-7.5 Npo Ceramic Capacitors


DSC04657

20 Pieces of Nice 2.5-7.5pf npo trimmer capacitors.

These are made by Stettner in Germany.

6mm dia. and have 3 legs on them

You can cut one leg off if do not need the 3 leg pattern.

Price...

20/$4.00








*****LM4871N AUDIO AMP'S*****


DSC04613

HERE IS A NICE 1.5 WATT AUDIO AMP 8 PIN DIP IC

LOW VOLTAGE...COMPLETE DATA INFO

CLICK HERE

VERY NICE AUDIO AMPS.

$1.00EA.

Special..buy 3 of the nice audio amps for..

3/$2.50




1/4" Switch Nuts


DSC04641

35 Nice 1/4" switch nuts.

Nice for all them switches and etc.

Price...

35/$1.00




1.5-12.5 Mica Trim Cap


DSC03454

Nice 1.5-12.5pf Mica Trim caps.

350 vdc and size of these...5/16" X 1/2".

These are nice to have around when you need some.

Price on these nice mica trim caps.

2/$1.00




1.5-25pf Mica Trim Cap


DSC03454

Nice 1.5-25pf Mica Trim caps.

350 vdc and size of these...5/16" X 1/2".

These are nice to have around when you need some.

Price on these nice mica trim caps.

$1.00 Ea.

BEST DEAL PRICE...

5/$4.00




2.5-50pf Mica Trim Cap


DSC03454

Nice 2.5-50pf Mica Trim caps.

350 vdc and size of these...5/16" X 1/2".

These are nice to have around when you need some.

Price on these nice mica trim caps.

$1.25 ea.

BEST DEAL PRICE...

5/$5.00





>DSC03454

Nice 2.5-100pf Mica Trim caps.

350 vdc and size of these trim caps...5/16" X 1/2".

These are nice to have around when You need some.

Price on these nice mica trim caps.

$1.35ea.

BEST DEAL PRICE...

5/$5.00




IMPORTANT..The same photo for all the little Mica 5/16" X 1/2" trim caps was used.

How ever the part number or numbers on the side of some will be different than in photo, but You will get the vaule listed.

This was done to save time on taking lots of photos.




1.5-12.5 Mica Trim Cap


DSC03454

Nice 1.5-12.5pf Mica Trim caps.

350 vdc and size of these...5/16" X 1/2".

These are nice to have around when you need some.

Price on these nice mica trim caps.

2/$1.00







Arco 20-250pf Mica Compression Trim Cap.


DSC04643

12-250PF Mica compression trim cap.

350 volt rating.

Arco No.425

3/4" X 3/8"..Nice cap.

Price...

$2.25 ea.




2.2UH SLUG TUNED COIL


DSC0391722222

10 Pieces of a little 2.2uh approx slug tuned coil

The coil size is..

3/4" long by 1/8" dia. approx

SALE PRICE...

10/$2.25







Fair-rite Beads


DSC0394381

Nice fair-rite beads....part number...27430008111

Size,.,,3/8" long by 1/8" dia.

These are 43 material.

Price

25/$2.50

NOTE: When order please give part number or bead with wire thru it..









100 PIECE BY-PASS CAP KIT


Here is a nice 100 Piece by-pass capacitor kit.

These are all Multilayer Ceramic Capacitors

Made by Murata,Kement, AVX, etc.

All long leads...50 volt or better..some 10% other +-20%

This 100 piece kit includes 25 pieces of the following vaules.


25 Pieces .1mf

25 Pieces .01mf

25 Pieces .001mf

25 Pieces .047mf


Price on this nice 100 Piece by pass cap kit is...

$5.00





3.541 MHZ QRP CRYSTALS


Photo no.1

DSC03917

Photo no.2

DSC03916

Nice 80 meter crystals..

3.541 mhz.

These are in HC-18U type package.

Look at photo that is what you will receive.

Look at Photo no. 2..you will see the freq. right on the button.

Price on these nice 80 meter crystals is....

$2.00 ea.

or buy 5 for only......

$6.25




145 PIECE CHOKE KIT


DSC00306

HERE IS A VERY NICE 140 PIECE CHOKE KIT WITH SOME OF THE MOST POPULAR VAULES.

5 PIECES .15UH

5 PIECES .33UH

5 PIECES .39UH

5 PIECES .47UH

5 PIECES .68UH

5 PIECES .82UH

5 PIECES 1.0 UH

5 PIECES 1.2UH

5 PIECES 1.5UH

5 PIECES 1.8UH

5 PIECES 2.2UH

5 PIECES 2.7UH

5 PIECES 3.3UH

5 PIECES 3.9UH

5 PIECES 4.7UH

5 PIECES 5.3UH

10 PIECES 5.6UH

5 PIECES 10UH

5 PIECES 12UH

5 PIECES 15UH

5 PIECES 18UH

5 PIECES 22UH

5 PIECES 27UH

5 PIECES 30UH

5 PIECES 33UH

5 PIECES 47UH

5 PIECES 62UH

5 PIECES 100UH

THIS IS A GREAT DEAL AND PRICE FOR THE 140 PIECE CHOKE KIT...

$12.50

Fall Special on 140 Piece choke kit.

$8.95





See table below on color code.

NOTE: THE PHOTO IS A EXAMPLE OF WHAT LITTLE CHOKES LOOK LIKE..




NOTE: See table below on color code for inductors and chokes.




COLOR CODES FOR MOST INDUCTORS


.22UH..red...red...silver.

.33uh..orange-orange-silver

.47uh..yellow...violet...silver

.68uh..blue...grey...silver

1.00uh..brown...gold...black

1.2uh..brown...red...gold

1.5uh..brown...green...gold

2.2uh..red...red...gold

2.70uh..red...violet...gold

3.30uh..orange...orange...gold

4.70uh...yellow...violet...gold

5.6uh..green...blue...gold

6.8uh..g\blue..grey...gold

10uh..brown...black...black

12uh..brown...red...black

15uh..brown...green...black

18uh..brown...grey...black

22uh..red...red...black

27uh..red...violet...black

33uh..orange...orange...black

39uh..orange...white...black

47uh..yellow...violet...black

56uh..green...blue...black

68uh..blue...grey...black

82uh..grey...red...black

100uh..brown...black...black

150uh..brown...green...brown

220uh..red...red...brown

330uh..orange...orange...brown

470uh..yellow...violet...brown

560uh..green...blue...brown

1000uh..brown..black..red


This covers most..but not all..but gives you a idea of the color code on molded chokes.

Some have a letter or number on them..example..4.7R means 4.7uh.




6.8-45PF MURATA TRIM CAPS.

DSC03875

10 Pieces of a nice 6.8-45pf 6mm dia. 100 vdc trimmer caps.2 pin type.

These are nice new old stock.

Price...10/$3.50




8-150PF MURATA TRIM CAPS.

DSC03874

10 Pieces of a nice 9-150PF 6mm dia. 100 vdc trimmer caps.2 pin type.

These are nice new old stock.

Price...10/$3.50




2-5-70PF Murata Trimmer Capacitors


DSC00408

10 Pieces of a very nice 2.5-70pf 6mm Murata Trimmer Capacitors...

6mm size and 2 legs and what you see in photos is what you will receive.

Price on 10 of these is...

10/$4.50

You save a lot by buying 10 pieces compared to the 1 piece price in Dan's Cat.No.9








3 KV HV INSULATED EXTENSION SHAFT


DSC0375999999

Insulated Extension Shaft

3KV RATING.

1/4" SHAFT FOR 1/4" INSIDE DIA. KNOB AND THE OUT PUT IS 1/4" DIA.

Nice shaft extender and price...

$5.00,P.Special...

2 for

$6.00











NICE LIGHTED 200UA EDGE METER


The Photo's below show you meter when lighted and then the other photo shows you other views of the meter.



Nice SENSITIVE 200 ľA Panel Meter.

The Coil Resistance 650 ohm.

[ 0.2ma-0.3ma ]

This meter has a little neon light and not sure of the voltage but I used a 9 volt battery to fire it up.

So..I would think up to 12 volts or so and maybe down to 6 volt.

The scale on the meter reads..1-2-3-4-5 red letters

The top part of the scale on meter reads.1-3-5-7-9-db-30

Blue letters

The lower part of scale is for watts and the upper part is for s-meter reading...or come up with your own ideas.

In the 2nd photo you can see 3 meters and this should give you a good idea of what all of the meter looks like..

The face of the meter measures 1/3/8" and the front of the meter that includes the little indentation on front of meter..that is a hair over 1-1/2"..This includes the little part that drops off.

front to back of meter...is..approx 1-1/2 inches.

CAUTION

The meter does have a + sign on meter for postive lead and negative sign for negative lead.

The coil on the meter will not handle much current at all...so..do not hook a battery direct to the 2 terminals on the meter.

If you do you will pretty much blow the coil..then the meter will be open and will not work.

I am mentioning this because I know there are a few out there that want to see the needle zing......well..it will if you hook a battery direct with out current dropping resisitor in series with the postive lead of the battery...[1.5volt battery with 47k resistor in line with postive lead of battery]

I have checked each meter befor it is packed..checked to make sure the meter movement is ok and that also the little neon light lights up..

Price on this nice 200 ua edge meter...

$4.50 EA.





DSC03748

The Photo above gives you a idea of what dip silver mica capacitors look like and is for reference only.




DIP SILVER MICA CAP KITS.

50 Piece Dip Silver Mica

Capacitor Kit.

Includes the following Dip Mica Capacitors.


2 Pieces 1500pf 10% tol. 500 Volt.

2 Pieces 750pf 1% tol. 500 Volt.

2 Pieces 620pf 5% tol. 300 Volt.

2 Pieces 470pf 5% tol. 500 volt.

2 Pieces 430pf 5% tol. 500 volt.

2 Pieces 330pf 5% tol. 500 volt.

2 Pieces 240pf 5% tol. 300 volt.

3 Pieces 180pf 1% tol. 500 volt.

4 Pieces 150pf 5% tol. 300 volt.

3 Pieces 120pf 1% tol. 300 volt.

2 Pieces 100pf 5 % tol. 500 volt.

2 Pieces 68pf 5% tol. 300 volt.

2 Pieces 56pf 5% tol. 300 volt.

2 Pieces 39pf 5% tol. 300 volt.

2 Pieces 27pf 5% tol. 300 volt.

2 Pieces 22pf 5% tol. 300 volt.

2 Pieces 20pf 5% tol. 300 volt.

Also 10 additional assorted dip silver mica capacitors for a total of 50 Pieces.

Nice kit of Dip Mica Caps.

Price..

$15.00

50 Piece dip mica kit sold out.













KEEP GOING LOTS MORE TO SEE!!













100 ASSORTED INDUCTORS AND IF CANS


HERE IS A DEAL..100 ASSORTED IF CANS AND INDUCTORS..SLUG TUNNED IF CANS ..COIL FORMS..CHOKES.....

A GREAT ASSORTMENT AND PRICE...FOR THE 100 ASSORTED IF CANS AND INDUCTORS IS...$5.00




1/4" to 1/4" Shaft Adapter


DSC03873


Here is a nice 1/4" to 1/4" shaft adapter.

The bore on one end with set screws fits a 1/4" shaft.

The other end with shaft is 1/4" Dia.

These are handy if you need to increase the lenght on a cap or pot.

PRICE...

$4.50ea.








20 Piece Feed Thru Cap Kit.


DSC03852000234


Nice 20 piece feed thru cap kit.

Includes the following vaules from left to right in photo above.


5 Pieces 3000pf...300 volt.

5 Pieces 1500pf...350 volt.

5 Pieces 1000pf....250 volt

5 Pieces 500pf...500 volt.


Total of 20 Pieces......

Price....

$5.00

BEST DEAL PRICE...

2 Kits for..

2/$8.00




1/4" TO 1/4" COUPLER


DSC03775

These are 1" long.

1/4" inside dia.

and have 4 set screws .

4 set screws give a secure fit.

Some 1/4" to 1/4" shaft adapters only have 2 set screws

1/4" inside dia.

Material is hard nylon.

Need to insulate that air vairable from the front panel?

Or need to keep air vairable above ground for that tunner?

Need to join two 1/4" shafts together?

More photos below.

DSC03776

DSC03777

DSC03778

Nice to have a few of these in the junk box when you need a 1/4" shaft adapter.

Also..got a shaft that is metric and not quite 1/4"

and need to extend shaft, these will work for that.

With 4 set screws even if shaft is a hair smaller in dia. than 1/4" these will still work.

Price on these nice 1/4" to 1/4" shaft adapters...

$2.50ea.


or buy 3 Pieces for only

$6.00







CL-191YG LEDS. { yellow-green }


DSC0367900

These are very nice smt leds.

CLICK HERE FOR COMPLETE DATA SHEET

This is a great deal and the price is.......

100/$2.00

The photo shows a strip of 10 pieces and you will receive 10 strips with 10 pieces per strip.








5.6UH CHOKES 10% TOL.


DSC03542

5.6UH Chokes 10% tol. (green-blue-gold) long leads.

Price on these nice 5.6uh chokes is...

25/$2.50




15UH MOLDED CHOKES 5% TOL.


DSC03569

Nice 15uh 5% tol. molded inductors..{brown-green-black-gold }

What you see in photo is what you will receive.

Price on these nice 15uh chokes...

10/$2.50

Or buy 25 pieces for only...

$4.00




1000UH CHOKES..5% TOL. THRU HOLE.


Color code...Brown-Black-Red-Gold.

DSC03531

1MH CHOKES..{ 1000UH } 5% TOL.

These are nice chokes and a great deal.


10/$2.50

Extra special deal..
25/$5.00







.01MF 50 VOLT MULTILAYER CAPS.


DSC00355


100 PIECES VERY NICE MURATA .01MF 50 VOLT RADIAL LEADS.. MULTILYER CAPS.

VERY NICE..GET SOME WHILE AT A GREAT PRICE.

100/$5.00




.1 Ceramic Capacitors.

Small size..long leads..50 volt rating.

Price...

100/$5.00

Stock up special..

300/$9.00



HC-6 CRYSTAL SOCKETS


DSC00248

NICE HC-6 CRYSTAL SOCKETS....

GREAT DEAL HERE..

$1.25 ea.











50 Piece Iron Powder Core Kit.


Here is a handy 50 piece Iron powder core kit.

5 Each of the following cores listed below


DSC05635


5 pieces T68-6 [ yellow ]

5 pieces T68-2 [ red ]

5 pieces T50-6 [ yellow ]

5 pieces T50-2 [ red ]

5 pieces T37-6 [ yellow ]

5 pieces T37-2 [ red ]

5 pieces T30-6 [ yellow ]

5 pieces T30-2 [ red ]

5 pieces T25-6 [ yellow ]

5 pieces T25-2 [ red ]

50 pieces total..

Price...

$13.50




50 PIECE IRON POWDER-FERRITE CORE KIT

KIT NO.A


DSC00124975

Here is a handy 50 piece Iron powder-ferrite core kit and includes the following listed below.

5 pieces T68-7 { white }

5 pieces T68-2 { red }

5 pieces T50-7 { white }

5 pieces T50-2 { red }

5 pieces T37-7 { white }

5 pieces T37-2 { red }

5 pieces FT50-43 { black }

5 pieces FT37-43 { black }

5 pieces FT50-61 { grey }

5 pieces FT37-61 { grey }

Note: the 61's and the 43's cores will be in separate bags and bag marked.

Price on this nice 50 Piece core kit is...

$18.50

CLOSE OUT SPECIAL.

$15.00



50 PIECE IRON POWDER-FERRITE CORE KIT

KIT NO.B


DSC000240097

Here is a handy 50 piece Iron powder-fair-rite core kit and includes the following listed below

5 pieces T68-6 { yellow }

5 pieces T68-2 { red }

5 pieces T50-6 { yellow }

5 pieces T50-2 { red }

5 pieces T37-6 { yellow }

5 pieces T37-2 { red }

5 pieces FT50-43 { black }

5 pieces FT37-43 { black }

5 pices FT50-61 { grey }

5 pieces FT37-61 { grey }

Note: the 61's and the 43's cores will be in separate bags and bag marked.


PRICE........

$17.50

CLOSE OUT SPECIAL.

$15.00




.001MF FEED THRU CAPACITORS.


DSC03753

10 Pieces of a 1000pf 250 volt feed thru capacitor.

These are nice and priced right at...

10/$3.50




.001MF 400 VOLT FEED THRU CAP DEAL



HERE IS A GREAT DEAL ON SOME VERY NICE STETTNER 1000PF { .001MF }400 VOLT FEED THRU CAPS.

SPECIAL DEAL...10/$4.75




1500 PF FEED THRU CAP DEAL



GREAT DEAL ON SOME 1500PF 350 VOLT FEED THRU CAPS.

SEE PHOTO FOR HOW U CAN USE A PIECE OF NO. 16 OR NO. 18 BUSS WIRE AND THEN U HAVE A FEED THRU CAP WITH LEADS ON IT.

PRICE...10/$3.50

BEST DEAL PRICE...

25/$5.00






1000 pf 500v Silver Plated Button Feed Thru Caps.


DSC03459

Button Bypass Caps Silver plated solder in bypass cap. 500v.

These are very nice Button Feed Thru caps and priced right.

Price on these is..

10/$2.75




1-5-30PF CERAMIC MICA TRIMMER CAP.


DSC00258

NICE SMALL 1.5-30PF CERAMIC MICA TRIM CAP.

BRASS ADJ SCREW AND BRASS PLATES.

150 VDC SIZE 3/8" LONG BY 1/4" WIDE.

10/$3.50




THREADED COIL SLUGS


DSC039361145

Threaded Ferite coil slugs

Size about 5/16" long by 3/16" dia.

Price...

10/$2.50

Final close out best deal price...

10/$2.50




MURATA 455Khz 2 PIN CERAMIC RESONATORS


DSC03737

Nice Murata 2 pin 455khz ceramic resonators.

Size of these 1/4" wide aprox by 3/8" tall.

Nice resonators...Price...

$1.00 ea.

BEST DEAL PRICE..

buy 10 pieces for only..

10/$6.75



100 PIECE BY-PASS CAP KIT


Here is a nice 100 Piece by-pass capacitor kit.

These are all Multilayer Ceramic Capacitors

Made by Murata,Kement, AVX, etc.

All long leads...50 volt or better..some 10% other +-20%

This 100 piece kit includes 25 pieces of the following vaules.


25 Pieces .1mf

25 Pieces .01mf

25 Pieces .001mf

25 Pieces .047mf


Price on this nice 100 Piece by pass cap kit is...

$5.00





CL-191YG LEDS.

YELLOW-GREEN


These are very nice smt leds.

These are gold plated on the bottom of the led...where they mount to the pc board.

CLICK HERE FOR COMPLETE DATA SHEET

This is a great deal and the price is.......

100/$2.00

BEST DEAL PRICE...

200/$3.00




680UH CHOKE 5% TOL. 650 MA.


DSC03555

Nice 680uh choke 650 ma. 5% tol. long leads..nice chokes.

Price on these nice chokes...

10/$2.50




1MH (1000UH ) SURFACE MOUNT INDUCTORS.


DSC03529

Here are some nice 1000uh ( 1MH ) surface mount inductors...case size 1812 and 5% tol.


Nice to have around and price at...


25/$2.50

NOTE: These come on factory tape and reel...not loose like in photo.




50 Piece Surface Mount choke kit.

25 Pieces 1000uh 5% tol.

25 Pieces 10uh 5% tol.

Total Pieces

[go up and look at photo of the 1000uh Surface Mount Chokes.

The 10uh same size and same type as the 100uh choke.

These come on tape]

Price on this nice 50 Piece surface mount choke kit.

$3.00



ADAPTER KIT FOR APC TYPE AIR VAIRABLES


DSC00357000

You got some apc-screw driver type air vairables in your junk box and want to put a 1/4" shaft on them?

Well here is a 4 piece adapter kit that will do just that.

1/4 metal spacer shown is 1/4" dia. X 1/2" long.

See Photo's of how to convert a screw driver apc type air vairable so that it has a 1/4" shaft.

Price on this 4 piece kit..

$1.00


CLICK HERE FOR INSTRUCTIONS ON HOW TO INSTALL THIS ADAPTER KIT.








HOW TO MAKE A AIR VAIRABLE SMALLER IN VAULE.


So maybe one of the panel mount air vairables here is not what you are looking for. Maybe you want or need a different vaule? No problem..you can fix that easy.

See examples in photos below on how to do it..alwasy start at end of air vairable..( not up by body )You will need a cap meter so you can see where you are at. I would just take 1 or 2 plates off at at time untill you get to where you want to be.

You can just cut off the part of air vairable you took plates off of if it bothers you.


Just check out the photos below and it pretty much shows you what to do.


PHOTO NO. 1

DSC00361

PHOTO NO. 2

DSC00362








MURATA 455Khz 2 PIN CERAMIC RESONATORS


DSC03737

10 Pieces of a nice Murata 2 pin 455khz ceramic resonators.

Size of these 1/4" wide aprox by 3/8" tall.

Nice resonators...Price...

$1.00 ea.





CL-191YG LEDS. { yellow-green }


DSC0367900

These are very nice smt leds.

CLICK HERE FOR COMPLETE DATA SHEET

This is a great deal and the price is.......

100/$2.00

The photo shows a strip of 10 pieces and you will receive 10 strips with 10 pieces per strip.







LM386M-1 SMT 8 PIN AUDIO AMP IC.


DSC03678

CLICK HERE FOR PIN OUT AND DATA.


Nice little audio amp ic's.

Price..10/$3.50

These are being closed out




MMBF102LTI FET.(SURFACE MOUNT MPF102)

These are made by Motorola.

These have the same pin out as a J310 smt..so have included the pin out for J-310 smt fet.

CLICK HERE FOR PIN OUT INFORMATION

PRICE...10/$2.00

Best deal price...

20/$3.00







8 PIN ROUND IC SOCKETS


DSC03504

Here are some very nice 8 pin round ic sockets..these are great to use with the 8 pin ic's above.

Price...

3/$1.00




CA3018A 12 PIN IC.


DSC03507

Nice CA3018A 12 PIN IC'S.

DATA HERE

PRICE...

$2.50 EA.




ULN2280 2 WATT 14 PIN AUDIO AMP



NICE..14 PIN 2 WATT AUDIO AMPS.

DIRECT REPLACEMENT FOR THE LM380 14 PIN 2.5 WATT AUDIO AMP.

FOR COMPLETE DATA ON THE ULN2280

CLICK HERE

VERY NICE AUDIO AMPS AND PRICE..

$1.35 EA.

Special deal...

5/$5.00




VARACTOR TUNING DIODE SPECIAL'S


Here are a few Varactor tuning diode specials.

If you can use what is listed below take advantage of the special prices on these nice tuning diodes.




10 MVAM108'S


10 Pieces MVAM108 VARACTOR TUNING DIODES

2 pin TO-92 Package.

Long leads.

Diode capacitance 440pf Minimum....500pf Typ...560pf Max

CLICK HERE FOR DATA ON THE MVAM108'S

These would possible make a replacement for these 2 varactor tuning diodes that are used in some projects on the net......the KV1235 AND KV1236...

Nice tuning diodes and while stock lasts special deal at only....

10/$8.50




5 PIECE IC DEAL.


Nice usefull 5 Piece thru hole IC deal.

Includes the following below.


3 Pieces SA602AN...8 PIN-THRU HOLE IC.

1 Piece MC1350P...8 PIN-THRU HOLE IC.

1 Piece LM386-1 ...8 PIN-THRU HOLE IC.

Price on this nice 5 Piece IC Deal...

$10.00





BSX19

BSX19 TO-18 METAL CAN LONG LEADS NPN HI GAIN

PRICE.....10/$1.00

tn_DSC00323

47UH SMT INDUCTOR..

APROX SIZE..10MM SQUARE AT BASE.

PRICE..4/$1.00

tn_DSC00366

220UH SMT INDUCTOR..NICE ITEM..AND SIZE AT BASE IS..AROUND 7MM SQUARE

PRICE..BAG OF 10 PIECES

FOR $1.50

tn_DSC00390

100 ASSORTED SURFACE MOUNT TANTALUM CAPS

LOTS OF DIFFERENT VAULES AND SIZES

GREAT TO HAVE AROUND AND PRICED DIRT CHEAP FROM DAN'S

BAG OF ONE HUNDERED ASSORTED SMT TANTALUMS...

$8.00

tn_DSC00382

.1MF SURFACE MOUNT CAPS.

CASE SIZE 1206..10% 50 VOLT


PRICE..100 PIECES FOR $3.00
OR 300 FOR $6.00

tn_DSC00398

100 PIECES .01MF 50V. 10% TOL. 1206 CASE SIZE XR7 SURFACE MOUNT CAPS.

PRICE..100 PIECES FOR $3.00
OR 300 PIECES FOR $6.00

tn_DSC00388

2N7002 SURFACE MOUNT MOSEFET

PRICE..25 PIECES FOR $2.00

tn_DSC00407

3 GHZ SILCON MMIC WIDE BAND AMP

6 PIN SURFACE MOUNT PACKAGE

C1D STAMPED ON FACE OF PART

CLICK HERE FOR DATA AND PIN OUT SHEET

PRICE..STRIP OF 5 PIECES FOR $4.00

tn_DSC00385

FAIR CHILD INTERGRATED LOAD SWITCH

CLICK HERE FOR COMPLETE DATA

PRICE..STRIP OF 10 PIECES FOR..$2.00

tn_DSC00406

UPC1675G 1.9GHZ GENERAL PURPOSE SILICON MMIC AMP

CLICK HERE FOR COMPLETE DATA SHEET

PRICE..STRIP OF 5 PIECES FOR $4.50

tn_DSC00411

MOTOROLA MRF9331LT1 NPN UHF-MICROWAVE TRANSISTOR..NEW OLD STOCK SURFACE MOUNT ON TAPE

SOT-143 PACKAGE

CLICK HERE FOR MORE DATA

PRICE..5/$3.50
BEST DEAL..

10/$5.00

tn_DSC04673

MMBF102LTI FET.(SURFACE MOUNT MPF102)

These are made by Motorola.

These have the same pin out as a J310 smt..so have included the pin out for J-310 smt fet.

CLICK HERE FOR PIN OUT INFORMATION.


Price...

10/$2.00

tn_DSC04677

HSMP-3820 (BLK) PIN DIODE SOT23 PIN OUT.

PRICE..10 FOR

$2.50,
BEST PRICE DEAL...

20/$3.00

tn_DSC04674

1 UF 50 VOLT SMT.

Tantalum Capacitors.

Case size. 3/16" long X 1/16" wide approx.

Price...

25/$1.00

tn_DSC04676

10 UF 16 VOLT SMT.

Tantalum Capacitors.

Case size 3/16" long X 1/16" wide approx.

Price.

25/$1.00

tn_DSC04675

22UF 20 VOLT SMT.

Tantalum Capacitors.

Case size 1/4" long X 3/16" wide approx.

Price.

25/$1.00

tn_DSC05069

100K Panel Pot Linear taper w-hardware and w/knob

Knob is Knurled on sides for good grip

Pointer line in middle.

Knob 9/16" tall aprox. X 1/2" dia.

Price for pot and knob.

$1.50ea.

HAMMURLAND 2.0-25PF SCREW DRIVER AIR VARIABLE...PANEL MOUNT..VERY NICE..APPROX 1/2" LONG BY 15/16" WIDE..

$4.25 EA.

tn_DSC00463

JACKSON BRO'S 1.8-24.5PF DIFFERENTIAL CAP..500 VDC..5/8" LONG BY 3/8" WIDE

PRICE
$1.75 EA.

tn_DSC00462

JACKSON BRO'S 2.5-14.5PF DIFFERENTIAL CAP..500 VDC..1/2" LONG BY 3/8" WIDE

PRICE..$1.25 EA.

tn_DSC00467

JACKSON BRO'S 2-15PF AIR TRIMMER..500 VDC

PRICE...$1.00 EA.

tn_DSC00468

JACKSON BRO'S 1.8-10.5PF AIR TRIMMER 500 VDC

PRICE..$1.00 EA.

tn_DSC00131

HARD TO FIND 2-20PF MICA CERAMIC COMPRESSION TRIMMER CAP.

SIZE..9/16" LONG BY 3/8" WIDE

350 VDC

PRICE..$1.25 EA.

tn_DSC00459

5-100PF MICA COMPRESSION TRIMMER CAP..350 VDC

SIZE..5/16" BY 1/2"

PRICE..$1.35EA.

tn_DSC00132

HARD TO FIND 2.5-40PF MICA CERAMIC COMPRESSION TRIMMER CAP.

SIZE 9/16" LONG BY 3/8" WIDE

35O VDC

PRICE..$1.25 EA.

tn_DSC00450

2.5-30PF MICA CERAMIC TRIMMER CAP

350 VDC..SIZE.5/16" BY 3/8"

PRICE..$1.25 EA.

tn_DSC00310

MICA COMPRESSION TRIMMER CAP..90-400PF AND 350 VDC

SIZE OF CAP 5/16" WIDE BY 11/16" LONG

PRICE..$2.50 EA.

tn_DSC00313

MURATA 2.5-11PF CERAMIC TRIMMER CAP.

THESE ARE AROUND 8MM SIZE ..250 VDC

PRICE..3/$1.35

tn_DSC00513

SMALL CERAMIC TRIMMER CAP

3.5-11PF 100 VDC

SIZE 3/16" DIA.

PRICE 5/$1.00
BEST DEAL..10/$1.50

tn_DSC00542

MINIATURE CERAMIC TRIMMER CAPS

1-30PF..THESE ARE THRU HOLE TRIMMERS..HOW EVER..BEND THE LTITLE TABS AT RIGHT ANGLE TO BODY OF CAP AND YOU HAVE A NICE LITTLE SURFACE MOUNT AIR TRIMMER

100 VDC RATING...NICE ITEMS..GET SOME WHILE AVAIL

PRICE..2/$1.00

tn_DSC00311

SPRAQUE GOODMAN GYC4000 3.5-40PF 10MM TRIMMER CAP. VOLTAGE RATING 100 VDC

VERY NICE PARTS AND MOUSERS CURRENT PRICE $1.37 EA.

PRICE..$1.00 EA.

BEST DEAL..5/$3.00

tn_DSC00516

SPRAQUE GOODMAN TYPE TRIMMER CAP

1.5-25PF

SIZE 8MM 100 VDC RATING.. NICE TRIMMER CAPS

PRICE..$1.00 EA.


BEST DEAL..5/$3.50

tn_DSC00312

SMALL SPRAQUE TYPE 2.2-22.5 TRIMMER CAP.

VOLTAGE RATING 100 VDC..SIZE..1/4" SQUARE

PRICE..3/$1.50

tn_DSC00316

SPRAUGE GOODMAN 0-10.5PF 350 VDC GLASS PISTON CAP

SIZE 3/4" LONG AND DIA.1/4"

PRICE..$1.25 EA.

BEST DEAL..5/$2.50

tn_DSC00380

DUAL 5-65PF CERAMIC MICA TRIM CAP.

350 VDC...GREAT PART

PRICE..$1.00EA

BEST DEAL..5/$1.50

tn_DSC00379

DUAL CERAMIC MICA TRIMMER CAP..350 VDC

50PF ONE SECTION..150PF OTHER SECTION

PRICE $1.00EA.

BEST DEAL..5/$1.50

tn_DSC00040

2.0-25PF LITTLE TRIMMER CAP. 100VDC RATING..

PRICE..$.65ea

tn_DSC00305

JFD 0-20PF SMALL PISTON CAP

DIA.1/4" AND LENGTH 11/16"

VERY NICE GLASS PISTON CAP.

PRICE..$2.00 EA.

tn_DSC00307

JFD 0-10PF 1/4" DIA. LENGHT 7/8"

PRICE..$1.50 EA.

tn_DSC00308

0-12.5 JFD GLASS PISTON CAP.

SIZE 11/16" DIA. LENGTH 1 INCH.

PRICE..$1.50 EA.

100UH CHOKES..650MA 10% TOL.

PRICE..25/$3.00

100K-OHM 25-TURN TRIM POT

BY MURATA PART NO.3102P

CLICK HERE FOR PIN OUT AND DIMENSIONS

DIMENSIONS ARE IN MILIMETERS

PRICE..$0.50 EA.


BEST DEAL PRICE...

10/$2.00

1K-OHM 15 TURN TRIM POT BY MURATA

CLICK HERE FOR PIN OUT AND DIMENSIONS

DIMENSIONS ARE IN MILIMETERS

PRICE..$0.50 EA.


BEST DEAL PRICE...

10/$2.50

500-OHM 15 TURN TRIM POT BY MURATA

CLICK HERE FOR PIN OUT AND DIMENSIONS

DIMENSIONS ARE IN MILIMETERS

PRICE..$0.50 EA.


BEST DEAL PRICE...

10/$2.50

1 MEG-OHM TRIM POTS BY MURATA

SMALL SIZE AND ABOUT 1/4 DIA. ON BODY OF TRIMMER AND LONG LEADS

MURATA PART NO.3321-H-105

PRICE...5/$1.00


OR 10/$1.50

SMALL MICA TRIMMER CAP..RANGE..1-60PF..5MM SIZE APROX AND 100 VDC

NICE FOR SMALL PROJECTS..BEND TABS AT RIGHT ANGLE AND HAVE A NICE SURFACE MOUNT TRIMMER CAP

PRICE..2/$1.00

AVID HEATSINK

tn_DSC00533

AVID #2049469-05-F

HERE IS A VERY NICE HEAVY DUTY HEATSINK

AVID PART NO. 2049469-05-F

SIZE IS 2 AND 3/8" TALL BY 1 AND 11/16" WIDE..HAS TAPED HOLED FOR MOUNTING AND ALSO FOR MOUNTING THE TRANSISTOR OR TRANSISTORS

OR DRILL AND TAP FOR YOUR OWN SPECS.

PRICE

tn_DSC00534

$5.00 EACH.

tn_DSC00485

DPDT TOGGLE SWITCH "ON-OFF-ON"

INCLUDES MOUNTING HARDWARE AND 6 AMP RATING

PRICE...$1.35 EA.

tn_DSC00490
tn_DSC00489

LITTLE STACK POLE BALUN CORE

2 HOLE..1/2" LONG BY ALL MOST 3/16" THICK BY 3/16" HIGH

61 MATERIAL

PRICE..4/$1.00

BEST DEAL PRICE...

10/$1.75

DELEVAN SLUG TUNNED COIL. 15/16" LONG AND DIA. 3/8" DIA... 2 TYPES AVAIALBLE.

  • 1.3-3.6UH
  • 1.3-3.6uh sold out

  • 2.0-6.0UH

    LITMITED SUPPLY AVAIL. NEW OLD STOCK.

$3.50 EA.

Summer Special

Delevan 2.0-6.0uh coil.

$1.50ea.

tn_DSC00506

DUAL WINDING SLUG TUNNED COIL FORM

SIZE IS..3/4" LONG BY 1/4" DIA.

INDUCTANCE IS

LARGEST WINDING IS 1.948UH ADJ.

SMALLER WINDING IS 1.555UH ADJ.

USE AS IS OR REWIND TO YOUR SPECS.

PRICE..3/$1.00

TOKO LITTLE DUAL WINDING COIL..NO SLUG..ONE SIDE ( 2 PIN SIDE )INDUCTANE IS..7.81UH..OTHER SIDE ( 3 PIN SIDE ) INDUCTANCE RANGE IS..47.78 UH..SIZE OF THE COIL WINDING AREA IS...7/8" TALL..USE AS IS..OR REWIND TO YOUR OWN SPECS..NEW OLD STOCK.

PRICE


3/$1.00

J.W. MILLER SLUGGED TUNNED IF CAN..PART NUMBER 9051 TUNNING RANGE 3.0UH-7.0UH..NICE PARTS..NEW OLD STOCK...

PRICE


$0.79EA.

tn_DSC00168

DUAL FT-243 CRYSTAL SOCKET

VERY RARE ITEM..

PRICE..$4.50 EA.

tn_DSC00167

FT-243 CRYSTAL SOCKET

VINTAGE ITEM..NO LONGER MADE

PRICE..$4.00 EA.


SOLD OUT

tn_DSC00170

MILLEN HC-6 CERAMIC CRYSTAL SOCKETS.

PRICE...$2.50 EA.

tn_DSC00242

UA301AHC METAL CAN

PRICE..$1.00 EA.

tn_DSC00296

MOTOROLA MPS-UO5 TRANSISTOR

PRICE..$2.00 EA.

tn_DSC00209

6-32 X 3/8" STAINLESS STEEL MACHINE SCREWS..SLOT HEAD..NICE PARTS

PRICE...BAG OF 25 FOR $1.00

tn_DSC00298

100 ASSORTED SOLDER POSTS

THE PIC. GIVES EXAMPLE OF WHAT YOU GET..LOTS OF DIFFERET TYPES AND SIZES

LOOKS LIKE SOME SILVER SOLDER POSTS, GOLD POST AND SO FORTH..A GREAT LITTLE ASSORTMENT TO HAVE AROUND

PRICE..BAG OF 100 FOR $5.00

Summer special on the 100 assorted solder posts.

100/$1.50

tn_DSC00441

AMPHENOL PANEL MOUNT BNC JACK.

INCLUDES MOUNTING WASHER AND NUT.

VERY NICE.


PRICE..$1.65 EA.

Best deal price..

3/$3.00

tn_DSC00341

PANEL MOUNT BNC CONNECTOR WITH MOUNTING NUT

PRICE..$1.65 EA.

tn_DSC00548

LITTLE CERAMIC RESONATOR..2 PIN TYPE..3.12MHZ IS STAMPED ON THE FACE OF THE PART..

THESE ARE NICE LITTLE PARTS

PRICE...5 PIECES FOR $1.00

ITEM

DISCRIPTION

PRICE

9 Volt battery snaps

3 Pieces 9 volt battery snaps

Nice to have around when you need some

Price...

3/$1.00

25 Trimmer caps.

25 assorted trimmer caps.

lots of vaules.

A great deal.

PRICE..
25/$2.50

3 Pin in line

transistor sockets.

3 Pin in line transistor sockets.

Nice 3 pin transistor sockets for transistors like fets and others where pins are in staight line on transistor.

price on these nice 3 pin inline transistor sockets.

10/$1.50

4 Pin in line

transistor sockets.

Nice 4 pin inline transistor sockets.

price on these nice 4 pin inline transistor sockets.

10/$1.50

1 MHZ CRYSTALS

SIZE..5/16" WIDE BY 1/8" HIGH

PRICE
$1.00 EA.

25 PIECES HOT CARRIER DIODES

25 ASSORTED HOT CARRIER DIODES

CONTAINS HP AND OTHER BRANDS OF HOT CARRIER DIODES.

THIS IS A GREAT DEAL

PRICE..25 ASSORTED HOT CARRIER DIODES FOR..

$3.50





500 Piece Grab Bags


500 piece plus grab bags are back.

These 500 piece grab bags contain all kinds of fun stuff.

Each bag will have over 500 pieces.

Dan's has had these 500 piece grab bags many times over the years and found time to make up some more.

The 500 Piece grab bags have a lot of left overs and discontinued items in them.

Items that Dan's does not have enough stock left to list and etc.

Price...

Price...

$6.50

Close out special.

3 of the 500 piece grab bags for only

$10.00


Notice: Due to weight of these 500 piece grab bags there is a limit of 1 of the 3 bag grab bag close out special per order.Thanks







BACK TO MAIN PAGE


BACK TO DAN'S CAT. NO.9